Section 115 (24 - Fuel System - Electronic Ignition -- CARRERA (997))
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- WM 2400AW Precautionary Measures When Handling Oxygen Sensors (All Models)
- WM 2400IN Technical Data - Fuel System (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 242419 Removing And Installing Air-Cleaner Element (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 242419 Removing And Installing Air-Cleaner Element (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 242419 Removing And Installing Air-Cleaner Element (Gt2 RS)
- WM 242420 Removing And Installing Air-Cleaner Element (Gt3, Gt3 RS & Gt3 RS 4.0)
- WM 242519 Removing And Installing Air Cleaner Housing (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 242519 Removing And Installing Air Cleaner Housing (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 242519 Removing And Installing Air Cleaner Housing (Gt2 RS)
- WM 243019 Removing And Installing Fuel Collection Pipe With Fuel Injectors (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 243019 Removing And Installing Fuel Collection Pipe With Fuel Injectors (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 244001 Checking Fuel Injector (All Models
- WM 244020 Removing And Installing Fuel Injectors (Turbo Coupe, Turbo CABRIO & Gt2)
- WM 244219 Removing And Installing Throttle Housing (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 244219 Removing And Installing Throttle Housing (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 244219 Removing And Installing Throttle Housing (Gt2 RS)
- WM 244519 Removing And Installing Hot-Film Mass Air Flow Sensor (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 244601 Checking Intake-Air Distributor For Leaks (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 244601 Checking The Intake-Air Distributor For Leaks (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 244619 Removing And Installing Intake-Air Distributor (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 244619 Removing And Installing Intake-Air Distributor (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 244619 Removing And Installing Intake-Air Distributor (CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, 911 CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4S Coupe, TARGA 4S, CARR. 4S CABRIO & Speedster) (W/X51 POWERKIT)
- WM 244619 Removing And Installing Intake-Air Distributor (Gt2 RS)
- WM 244620 Removing And Installing Intake-Air Distributor (Turbo Coupe, Turbo CABRIO & Gt2)
- WM 244637 Disassembling And Assembling Intake-Air Distributor (CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, 911 CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4S Coupe, TARGA 4S, CARR. 4S CABRIO & Speedster) (W/X51 POWERKIT)
- WM 247019 Removing And Installing DME (DFI) Control Unit (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Speedster, Gt3 & Gt3 RS)
- WM 244719 Removing And Installing Intake Manifold (CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, 911 CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4S Coupe, TARGA 4S, CARR. 4S CABRIO & Speedster) (W/X51 POWERKIT)
- WM 246319 Removing And Installing High-Pressure Pump (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 246319 Removing And Installing High-Pressure Pump (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 246919 Removing And Installing Oxygen Sensor Upstream Of Catalytic Converter (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 246919 Removing And Installing Oxygen Sensors Upstream Of Catalytic Converter (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 246919 Removing And Installing Lambda Sensor Upstream Of Catalytic Converter (Turbo Coupe, Turbo CABRIO & Gt2)
- WM 247019 Removing And Installing DME (DFI) Control Unit (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2 & Gt2 RS)
- WM 247019 Removing And Installing DME Control Unit (CARR. Coupe, CARR. S Coupe, "Sport Classic", CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO)
- WM 247019 Removing And Installing DME Control Unit (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO Gt3 & Gt3 RS)
- WM 247319 Removing And Installing Oxygen Sensor Downstream Of Catalytic Converter (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 247319 Removing And Installing Oxygen Sensors (LS) Behind Catalytic Converter (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 247319 Removing And Installing Lambda Sensor Downstream Of Catalytic Converter (Turbo Coupe, Turbo CABRIO & Gt2)
- WM 248019 Removing And Installing Intake Manifold Pressure Sensor (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 247419 Removing And Installing Resonance Tube (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 247419 Removing And Installing Tuning Pipe (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO)
- WM 248302 Leak-Testing The Vacuum System (Gt3, Gt3 RS & Gt3 RS 4.0)