Technical values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Intake manifold to cylinder head bank 1-3 | M6 x 25 external Torque screw | Tightening torque | 13 Nm (115 INCH lbs.) | ||
| Wire harness bracket to intake manifold, bank 1-3 | M6 x 12 external Torque screw | Tightening torque | 10 Nm (88 INCH lbs.) | ||
| Intake manifold to cylinder head bank 4-6 | M6 x 25 external Torque screw | Tightening torque | 13 Nm (115 INCH lbs.) | ||
| Wire harness bracket to intake manifold, bank 1-3 | M6 x 12 external Torque screw | Tightening torque | 10 Nm (88 INCH lbs.) |