LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (24 - Fuel System - Electronic Ignition -- CARRERA (997)) >> WM 243019 Removing And Installing Fuel Collection Pipe With Fuel Injectors (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Leaking fuel supply lines
  • Emerging fuel
  • Risk of fire

→ Perform leak test.

  1. Perform leak test.

    → 200101 CHECKING FUEL SYSTEM (HIGH-PRESSURE SIDE) FOR LEAKS - TURBO ENGINE .

    WARNING: Caustic fluids
    • Danger of chemical burns

    → Avoid contact with caustic fluid.

    → Wear personal protective gear.

    → Ensure that there is good ventilation.

    → If you do come into contact, wash off immediately with plenty of warm water and contact a doctor if necessary.

  2. Remove adhesive residue on sealing faces of intake ports with acetone if necessary.
  3. Install intake-air distributor.

    → 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR - TURBO ENGINE .

  4. Connect the battery.

    → 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY .

  5. Use PIWIS Tester II 9818  to perform the First Start  function.

    → 2001IN BLEEDING FUEL SYSTEM HIGH-PRESSURE SIDE (FIRST START FUNCTION) .