LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (24 - Fuel System - Electronic Ignition -- CARRERA (997)) >> WM 244620 Removing And Installing Intake-Air Distributor (Turbo Coupe, Turbo CABRIO & Gt2) >> Information >> Overview

WM 244620 Removing And Installing Intake-Air Distributor (Turbo Coupe, Turbo CABRIO & Gt2): Information: Overview

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Intake-Air Distributor
G09828799Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Intake-air distributor 1-3 (left)
  2. Seal
  3. Screws
  4. Centre intake-air distributor
  5. Seal
  6. Rubber sleeve
  7. Screw-type clamp
  8. Intake-air distributor 4-6 (right)
scientia non olet · About LEMON Manuals