Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Replace intake air distributor to intake pipe screws | M6 x 30 external Torx screw, microencapsulated | Tightening torque | 13 Nm (9.6 ft. lbs.) | ||
| Replace oil filler neck to oil filler pipe | M6 x 30 external Torx screw, microencapsulated | Tightening torque | 13 Nm (9.6 ft. lbs.) | ||
| Oil filler neck to oil filler tube | M6 x 12 external Torx | Tightening torque | 10 Nm (7.4 ft. lbs.) | ||
| Oil filler pipe to crankcase flange | M6 x 20 exterior Torx screw | Tightening torque | 13 Nm (9.6 ft. lbs.) | ||
| Throttle housing support | M6 hexagon nut | Tightening torque | 6 Nm (53 INCH lbs.) | ||
| Engine carrier to engine mounting | M12 | Tightening torque | 85 Nm (63 ft. lbs.) |