Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| High-pressure pump to cylinder head | External Torx screw, M6 x 25 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Union nut on fuel high-pressure line (a/f 17) | Coat thread and cone with OKS 1700 | Tightening torque | 20 Nm (15 ft. lb.) | ||
| Union nut on fuel low-pressure line (a/f 14) | Coat thread with OKS 1700 | Tightening torque | 20 Nm (15 ft. lb.) | ||
| Cover on high-pressure pump | External Torx screw, M6 x 40 and M6 x 25 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Heat protection panel on high-pressure pump | External Torx screw, M6 x 12 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Coolant supply line | External Torx screw, M6 x 12 | Tightening torque | 13 Nm (9.5 ft. lb.) |