Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Install rear silencer.
→ 263319 REMOVING AND INSTALLING REAR SILENCER - TURBO ENGINE .
Fill in coolant.
→ 193817 DRAINING AND FILLING COOLANT - TURBO ENGINE (INCLUDES BLEEDING THE SYSTEM) .
Install air cleaner housing.
→ 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING .
Connect the battery.
→ 2706IN00 WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY .
Start the system for the first time.
→ 2001IN BLEEDING FUEL SYSTEM HIGH-PRESSURE SIDE (FIRST START FUNCTION) .
If the high-pressure pump was replaced, a high-pressure adaptation is required.
→ 247019 REMOVING AND INSTALLING DME (DFI) CONTROL UNIT .