Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Intake-air distributor to cylinder head | M6 x 35 - observe correct tightening sequence | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Vacuum unit to resonance tube | Self-tapping screw - tighten carefully | Tightening torque | 5 Nm (3.5 ft. lb.) | ||
| Support to intake-air distributor | M6 x 12 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Throttle housing support to air conditioning compressor | M6 hexagon nut | Tightening torque | 6 Nm (4.5 ft. lb.) | ||
| Throttle housing to resonance tube | M6 x 50 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Engine carrier to engine mounting | M12 | Tightening torque | 85 Nm (63 ft. lb.) |