LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (24 - Fuel System - Electronic Ignition -- CARRERA (997)) >> WM 244519 Removing And Installing Hot-Film Mass Air Flow Sensor (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Hot-film MAF sensor to air cleaner housing Torx tapping screw (T25) Tightening torque 3 Nm (2 ft. lb.)    
Threaded joint on top half of air filter Torx tapping screw (T25) Tightening torque 3 Nm (2 ft. lb.)    
scientia non olet · About LEMON Manuals