Technical Values

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Location	Description	Type	Basic value
Fuel collection pipe to intake-air distributor	M6 screw	Tightening torque	10 Nm (7.5 ft. lb.)
Intake-air distributor to cylinder head	M6 screw	Tightening torque	10 Nm (7.5 ft. lb.)
Connecting hose to fuel collection pipe	Union nut, a/f 19	Tightening torque	30 Nm (22 ft. lb.)
Intake air line to turbocharger	screw and collar nut, M6	Tightening torque	10 Nm (7.5 ft. lb.)
Secondary-air pump to holder	M6 screw	Tightening torque	10 Nm (7.5 ft. lb.)
Oil-filter console to flange	M8 external Torx screw	Tightening torque	23 Nm (17 ft. lb.)
Oil-filter console to holder	M6 external Torx screw	Tightening torque	10 Nm (7.5 ft. lb.)
Intake-air distributor to cylinder head	M6 screw	Tightening torque	10 Nm (7.5 ft. lb.)
Fuel collection pipe to intake-air distributor	M6 screw	Tightening torque	10 Nm (7.5 ft. lb.)
Connecting hose to fuel collection pipe	Union nut, a/f 19	Tightening torque	30 Nm (22 ft. lb.)
Fuel line to pressure regulator	Union nut, a/f 22	Tightening torque	30 Nm (22 ft. lb.)
Oil line to oil tank	Union nut, a/f 32	Tightening torque	60 Nm (44 ft. lb.)
Air conditioning compressor to unit carrier	M10 screw	Tightening torque	23 Nm (17 ft. lb.)
Fuel line to fuel cooler	Union nut, a/f 17	Tightening torque	25 Nm (19 ft. lb.)
Oil filler neck holder to intake distributor	M6 screw	Tightening torque	10 Nm (7.5 ft. lb.)
Transverse strut to intake-air distributor	M6 screw	Tightening torque	10 Nm (7.5 ft. lb.)
Collar nut to engine mounting threaded bolt	M12	Tightening torque	85 Nm (63 ft. lb.)