Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Intake-air distributor to cylinder head | Combination screw with washer, M6 x 25 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Fuel collection pipe to intake-air distributor | External Torx screw, M6 x 12 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Connecting hose to fuel collection pipe | Union nut, a/f 19 | Tightening torque | 30 Nm (22 ft. lb.) | ||
| Intake air line to turbocharger | M6 external Torx screw and M6 collar nut | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Secondary-air pump to holder | External Torx screw, M6 x 50 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Oil-filter console to flange | M8 screws | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Oil-filter console to holder | Hexagon socket, M6 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Intake-air distributor to cylinder head | M6 screw | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Fuel collection pipe to intake-air distributor | M6 screw | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Connecting hose to fuel collection pipe | Union nut, a/f 19 | Tightening torque | 30 Nm (22 ft. lb.) | ||
| Fuel line to pressure regulator | Union nut, a/f 19 | Tightening torque | 30 Nm (22 ft. lb.) | ||
| Oil filler neck holder to intake-air distributor | M6 screw | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Mounting for oil filler neck holder | Internal Torx screws, M6 x 12 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Air-conditioning compressor to unit carrier | M10 screw | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Fuel line to fuel cooler | Union nut, a/f 17 | Tightening torque | 25 Nm (19 ft. lb.) | ||
| Mounting for fuel line holder | External Torx screw, M6 x 12 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Screw-type clamps on center intake-air distributor | Tightening torque | 3 Nm (2 ft. lb.) | |||
| Strut to intake-air distributor | External Torx screw, M6 x 12 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Collar nut on engine mounting threaded bolt | M12 | Tightening torque | 85 Nm (63 ft. lb.) |