LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (24 - Fuel System - Electronic Ignition -- CARRERA (997)) >> WM 244519 Removing And Installing Hot-Film Mass Air Flow Sensor (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove air cleaner housing.

    → 242419 REMOVING AND INSTALLING AIR-CLEANER ELEMENT   .

  2. Remove top half of air filter.
    1. 2.1. Unscrew eight Torx tapping screws (T25 screw insert) on the upper part of the air filter.
      Fig 1: Identifying Screws On Top Half Of Air Filter
      G09828676Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    2. 2.2. Lift off top half of air filter -1-  .
      Fig 2: Identifying Bottom Half Of Air Filter With Air-Cleaner Elements
      G09828677Courtesy of PORSCHE CARS NORTH AMERICA, INC.