LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (24 - Fuel System - Electronic Ignition -- CARRERA (997)) >> WM 244637 Disassembling And Assembling Intake-Air Distributor (CARR. S Coupe, "Sport Classic", CARR. GTS Coupe, 911 CARR. S CABRIO, CARR. GTS CABRIO, CARR. 4S Coupe, TARGA 4S, CARR. 4S CABRIO & Speedster) (W/X51 POWERKIT) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install intake-air distributor.

    → 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR - X51 .

  2. Following installation of the intake-air distributor, tighten the screws of the connecting strips to the center section.

    → Tightening torque: 7 Nm  (5 ft. lb.)

scientia non olet · About LEMON Manuals