LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (24 - Fuel System - Electronic Ignition -- CARRERA (997)) >> WM 247419 Removing And Installing Tuning Pipe (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO & CARR. 4S CABRIO) >> Preliminary Work >> Preliminary Work For Removing Tuning Pipe

Preliminary Work For Removing Tuning Pipe

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery → WM 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY (CARR. COUPE, CARR. S COUPE, "SPORT CLASSIC", CARR. CABRIO, CARR. S CABRIO, CARR. 4 COUPE, TURBO COUPE, CARR. 4S COUPE, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, GT3, GT2, GT3 RS)- chapter on "disconnecting"  .
  2. Remove air cleaner housing → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING  - chapter on "removing".