LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (24 - Fuel System - Electronic Ignition -- CARRERA (997)) >> WM 244619 Removing And Installing Intake-Air Distributor (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Installation >> Tightening Sequence

Tightening Sequence

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position screws in tightening sequence and then tighten to the prescribed torque.
    Fig 1: Intake-Air Distributor Screws Tightening Sequence
    G09828717Courtesy of PORSCHE CARS NORTH AMERICA, INC.