Preliminary Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Hot components
- Risk of burns
→ Let hot components cool down.
→ Wear personal protective gear.
- Disconnect the battery.
→ 2X00IN02 WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY .
- Release drive belt.
→ 137819 REMOVING AND INSTALLING DRIVE BELT .
WARNING: Hot fluid- Danger of scalding
→ Let the fluid cool down.
→ Wear personal protective gear.
- Drain coolant.
→ 193817 DRAINING AND FILLING COOLANT (INCLUDES BLEEDING THE SYSTEM) .
- Remove coolant regulator housing cover.
→ 195519 REMOVING AND INSTALLING HOUSING FOR COOLANT REGULATOR .