Section 130 (97 - Cables -- CARRERA (997))
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- WM 9700IN Measurement Of Closed-Circuit Current (All Models)
- WM 970919 Removing And Installing Main Wire Harness (All Models)
- WM 971019 Removing And Installing Vehicle Electrical System Control Unit (All Models)
- WM 971519 Removing And Installing Front Wire Harness (Except Turbo)
- WM 971619 Removing And Installing Wire Harness For Front-End (All Models)
- WM 972019 Removing And Installing Wiring Harness For Center Console (All Models)
- WM 972519 Removing And Installing Rear Wire Harness (All Models)
- WM 973219 Removing And Installing Wiring Harness For Door (All Models)
- WM 973755 Replacing Wire Harness For PASM (All Models)
- WM 974519 Removing And Installing Wire Harness For Battery Wiring (All Models)
- Tools
- Technical Values
- Preliminary Work
- Preliminary Work For Ground Strap And B+ Line Of Battery
- Preliminary Work For B+ Line From Power Distributor To Transmission Connection Point
- Preliminary Work For Engine B+ Line From Generator To Starter
- Preliminary Work For B+ Line From Starter To Transmission Connection Point
- Preliminary Work For Engine Ground Strap
- Removing Wire Harness For Battery Wiring
- Removing Ground Strap And B+ Line Of Battery
- Remove B+ Line From Power Distributor To Transmission Connection Point
- Removing B+ Line From Starter To Transmission Connection Point
- Removing Engine Ground Strap
- Removing B+ Wire Harness For Engine In Vehicles With Manual Transmission
- Removing B+ Wire Harness For Engine In Vehicles With Automatic Transmission
- Installing Wire Harness For Battery Wiring
- Installing Ground Strap And B+ Line Of Battery
- Install B+ Line From Power Distributor To Transmission Connection Point
- Installing B+ Line From Starter To Transmission Connection Point
- Fitting Ground Strap To Engine
- Installing B+ Wire Harness For Engine In Vehicles With Manual Transmission
- Installing B+ Wire Harness For Engine In Vehicles With Automatic Transmission
- Subsequent Work
- Subsequent Work For Ground Strap And B+ Line Of Battery
- Subsequent Work For B+ Line From Power Distributor To Transmission Connection Point
- Subsequent Work For B+ Line From Starter To Transmission Connection Point
- Subsequent Work For Engine Ground Strap
- Subsequent Work For Engine B+ Line From Generator To Starter
- WM 975219 Removing And Installing Wire Harness For Engine (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2 & Gt2 RS)
- WM 975319 Removing And Installing Wire Harness For Seat Heater (All Models)
- WM 975519 Removing And Installing Wire Harness For Convertible Top (Speedster)
- WM 975619 Removing And Installing Wire Harness For Backrest (Front Seat) (All Models)
- WM 975619 Removing And Installing Wire Harness For Seat (Folding Sports Bucket Seat) (All Models)
- WM 975719 Removing And Installing Wire Harness For Seat Surface (Front Seat) (All Models)
- WM 975719 Removing And Installing Wire Harness For Electrically Adjustable Seat (All Models)
- WM 975719 Removing And Installing Wire Harness For AWS (Folding Sports Bucket Seat) (All Models)
- WM 976555 Replacing Wire Harness For Anti-Lock Brake System (Abs) (All Models)
- WM 976623 Installing Wire Harness For Airbag (All Models)
- Tools
- Preliminary Work
- Preliminary Work For Wire Harness For Passenger's Airbag Unit
- Preliminary Work For Wire Harness For Left Seat-Belt Tensioner
- Preliminary Work For Wire Harness For Right Seat-Belt Tensioner
- Preliminary Work For Wire Harness For Left Head Airbag (Triggering Unit To A-Pillar Connection Point)
- Preliminary Work For Wire Harness For Right Head Airbag (Triggering Unit To A-Pillar Connection Point)
- Preliminary Work For Head Airbag Wire Harness (Head Airbag To A-Pillar Connection Point)
- Tools And Materials
- Installing Wire Harness For Airbag
- Subsequent Work
- Subsequent Work For Wire Harness For Passenger's Airbag Unit
- Subsequent Work For Wire Harness For Left Seat-Belt Tensioner
- Subsequent Work For Wire Harness For Right Seat-Belt Tensioner
- Subsequent Work For Wire Harness For Left Head Airbag (Triggering Unit To A-Pillar Connection Point)
- Subsequent Work For Wire Harness For Right Head Airbag (Triggering Unit To A-Pillar Connection Point)
- Subsequent Work For Head Airbag Wire Harness (Head Airbag To A-Pillar Connection Point)
- WM 976719 Removing And Installing Wire Harness For Rear Spoiler (Gt2, Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 976719 Removing And Installing Wire Harness For Rear Spoiler/Rear Lid (Gt3 & Gt3 RS)
- WM 977019 Removing And Installing Wiring Harness For Number Plate Light (All Models)
- WM 977223 Installing Optical WAVEGUIDE (All Models)
- WM 9772IN Optical WAVEGUIDE (LWL) - Most Bus (All Models)
- Tools
- Optical Waveguide (LWL) - MOST Bus
- Requirements When Working With LWL
- Storage, Packing, Transport
- Installing The LWL In The Vehicle
- Repair
- Push-On Connector - Dust Boots
- Control Unit Plug Connector (Wiring Harness Side)
- Push-On Connector - Connection Points
- Optical Fiber (LWL) - Module
- Optical Waveguide Variants
- Removing Optical Contacts On Connector Side
- Installing Optical Contacts On Connector Side
- Removing And Installing Optical Contacts On Socket Side
- Installing Optical Contacts On Socket Side
- WM 978119 Removing And Installing Wire Harness For TIPTRONIC Transmission (All Models)
- WM 978319 Removing And Installing Relay Carrier 1 (All Models)
- WM 978409 Undoing And Securing FUSEBOX (All Models)
- WM 978919 Removing And Installing Power Distributor (All Models)
- WM 978931 Replacing Pins On The Power Distributor With Screw Bolts (All Models)
- WM 979009 Removing And Installing Relay Carrier (All Models)
- WM 979255 Replacing Fuse Element (All Models)
- WM 9797IN Connector - General Information (All Models