Removing Front Wire Harness

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The front wire harness is made up of two separate parts (left and right).

Fig 1: Identifying Front Left Wire Harness Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front left wire harness -A-

Fig 2: Identifying Front Right Wire Harness Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front right wire harness -B-

The procedure for removing the front left wire harness is described here.

Release and unplug electric connector on the auxiliary headlight -C- .

Fig 3: Unplugging Electric Connector On Auxiliary Headlight
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Release and unplug electric connector on the side direction indicator -D- .

Fig 4: Unplugging Electric Connector On Direction Indicator
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Disengage wire harness at the auxiliary headlight and at the front apron -E- .

Fig 5: Disengaging Wire Harness
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove wire harness.