Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screws securing B+ lead to transmission | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Fastening nut securing wheel sensor connector socket to wheel carrier (M6) | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Fastening nut securing ground straps to body (M6) | Tightening torque | 9 Nm (6.5 ft. lb.) | |||
| Fastening screw securing mounting saddle to body (M6 x 25) | -1- | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Fastening screws for support | -2- | Tightening torque | 7.2 Nm (5.5 ft. lb.) | ||
| Fastening screw securing seat belt to body | -4- | Tightening torque | 50 Nm (37 ft. lb.) | ||
| Fastening screw securing lateral footwell trim panel (driver's side) to body | -2- | Tightening torque | 3 Nm (2 ft. lb.) |