Storage, Packing, Transport
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
The LWL must not be stored outside.
The LWL must be protected from direct sunlight during storage.
The LWL must be protected from high humidity during storage. Recommended storage conditions: Temperature - between -20 °C and +40 °C, humidity - between 40% and 60%.
The LWL must be stored in a box made of cardboard, or in a plastic bag.
Force must not be applied to the stored LWL which could deform or damage it.
The LWL must be stored with the dust boot attached.
While storing, the bending radius must not be smaller than 300 mm.
LWL with damaged surfaces must be replaced.