Installing Vehicle Electrical System Control Unit

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Press electrical plugs into control unit and lock them -arrow- so they are felt to engage.

Fig 1: Inserting Connectors
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Push vehicle electrical system control unit upwards into the holder. It must engage properly. Make sure the electrical leads are not pinched.

Fig 2: Pushing Electrical System Wiring Into Retaining Bracket
Courtesy of PORSCHE CARS NORTH AMERICA, INC.