Removing Relay Carrier

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Relay Carrier Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

B - Relay carrier

Fig 2: Removing Retaining Brackets

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrew the four fastening screws -4- and the fastening nut -5- and lift the retaining brackets for the DME control module and the relay carrier.
Unscrew the two fastening nuts for the relay carrier and disengage the relay carrier from the retaining bracket.

Fig 3: Removing Fastening Nuts Of Relay Carrier
Courtesy of PORSCHE CARS NORTH AMERICA, INC.