Installing Wiring Harness For Number Plate Light

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Attach the connectors to the four ParkAssist sensors until they are felt to engage.

Fig 1: Attaching Connectors For Park Assist Sensors
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Insert the connectors for the two number plate lights until they are felt to engage.

Fig 2: Inserting Number Plate Light Connectors
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Insert the wiring harness for the number plate light into the four line holders.

Fig 3: Inserting Wiring Harness For Number Plate Light Into Line Holders
Courtesy of PORSCHE CARS NORTH AMERICA, INC.