Installing Front Wire Harness

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The procedure for installing the front left wire harness is described here.

Position and engage wire harness in the front apron -E- .

Fig 1: Engaging Wire Harness
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Plug in electric connector on the side direction indicator -C- until the connector engages securely.

Fig 2: Plugging In Electric Connector On Direction Indicator
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Plug in electric connector on the auxiliary headlight -D- until the connector engages securely and engage the wire harness on the auxiliary headlight.

Fig 3: Plugging In Electric Connector On Auxiliary Headlight
Courtesy of PORSCHE CARS NORTH AMERICA, INC.