LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (97 - Cables -- CARRERA (997)) >> WM 975619 Removing And Installing Wire Harness For Seat (Folding Sports Bucket Seat) (All Models) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front seat. → Removing Folding Sports Bucket Seat - section on "Removing"
  2. Remove the side airbag. → Removing Side Airbag (Folding Sports Bucket Seat) - section on "Removing"
  3. Remove front seat cushion and partly loosen the seat cover at the side of the seat. → Removing Cover For Front Seat (Folding Sports Bucket Seat) - section on "Removing"
  4. Partly loosen the front backrest cover at the inner side of the seat. → Removing Cover For Front Backrest (Folding Sports Bucket Seat) - section on "Removing"
  5. Mount the front seat on the assembly fixture. → Mounting Front Seat On Assembly Fixture
scientia non olet · About LEMON Manuals