Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening nut M6, main wire harness at left dashboard bracket | Tightening torque | 3.5 Nm (2.5 ft. lb.) | |||
| Fastening screw M6 x 16, holder for relay carrier to dashboard bracket | Tightening torque | 3.5 Nm (2.5 ft. lb.) | |||
| Fastening nut M6, ground straps to dashboard bracket | Tightening torque | 9 Nm (6.5 ft. lb.) | |||
| Fastening nut M6, ground straps to body | Tightening torque | 9 Nm (6.5 ft. lb.) | |||
| Fastening nut M6, ground straps to body | Tightening torque | 9 Nm (6.5 ft. lb.) | |||
| Fastening nut M6, ground straps to body | Tightening torque | 9 Nm (6.5 ft. lb.) | |||
| Fastening screws for support | -2- | Tightening torque | 7.2 Nm (5.5 ft. lb.) | ||
| Fastening screw, seat belt to body | -4- | Tightening torque | 50 Nm (37 ft. lb.) | ||
| Fastening nuts M6, battery retaining bracket to body | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Fastening screw M6, wheel sensor connector socket to wheel carrier | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Fastening nut M6, ground straps to body | Tightening torque | 9 Nm (6.5 ft. lb.) |