LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (97 - Cables -- CARRERA (997)) >> WM 975619 Removing And Installing Wire Harness For Backrest (Front Seat) (All Models) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat. → Removing Front Seat - section on "Removing"
  2. Remove cushion carrier for front backrest. → Removing Cushion Carrier For Front Backrest - section on "Removing"
  3. Remove cover for backrest. → Removing Cover For Backrest - section on "Removing"
  4. Remove suction fan for seat surface. → Removing Suction Fan For Seat Surface - section on "Removing"


  1. Remove cushion carrier for front backrest. → Removing Cushion Carrier For Front Backrest - section on "Removing"
  2. Remove cover for backrest. → Removing Cover For Backrest - section on "Removing"

    Information 

    Only for vehicles with adaptive sports seats.

  3. Remove air cushion for backrest. → Removing Air Cushion For Backrest - section on "Removing"
scientia non olet · About LEMON Manuals