Installing Wiring Harness For Centre Console
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
The wire harness for center console spare parts scope means the scope for fully-equipped vehicles. Depending on the vehicle equipment, connectors not required are tied to the wire harness for center console using tie-wraps.
When doing this, ensure the lines are routed correctly so that no line becomes trapped or damaged.
- Lay wiring harness with retaining clips in center console and push on retaining clips at the points provided.
- Push electric connectors onto equipment versions until they are felt to engage.