LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (97 - Cables -- CARRERA (997)) >> WM 971619 Removing And Installing Wire Harness For Front-End (All Models) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front apron. → Installing front apron - chapter on "Installing"
  2. Install headlight at left and right. → Installing Main Headlight - chapter on "Installing"
  3. Installing front-end control unit → Installing Front Control Unit - chapter on "Installing"
  4. Install linings for luggage compartment. → Installing Front Luggage Compartment Cover - chapter on "Installing"
  5. Carry out work instructions after disconnecting the battery. → Disconnecting And Connecting The Battery