LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (97 - Cables -- CARRERA (997)) >> WM 972019 Removing And Installing Wiring Harness For Center Console (All Models) >> Removing Wiring Harness For Center Console

Removing Wiring Harness For Center Console

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release electric connectors for the equipment versions (e.g. cigarette lighter, interior sensor etc. -A-  and unplug.
    Fig 1: Releasing Electric Connectors
    G09831193Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Disengage retaining clips with wiring harness on center console and remove the harness.
    Fig 2: Disengaging Wiring Harness
    G09831194Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals