LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (97 - Cables -- CARRERA (997)) >> WM 975319 Removing And Installing Wire Harness For Seat Heater (All Models) >> Information >> Spare Parts Information

Spare Parts Information

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The seat-heating wire harness is only available as a spare part together with the heating element. The heating element is stuck to the padding and can only be replaced together with the padding. Depending on the I number, the padding spare part is only supplied with the heating element and seat-heating wire harness attached.

Replace padding for front seat. → Removing And Installing Padding For Front Seat