Installing Relay Carrier

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Engage relay carrier on retaining bracket and screw down with the two fastening screws -1- . → Tightening torque: 4.5 Nm (3.5 ft. lb.)

Fig 1: Engaging Relay Carrier
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 2: Installing Retaining Brackets
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Place retaining brackets on the body and screw down with the four fastening screws -4- and the fastening nut -5- . → Tightening torque: 2.2 Nm (1.5 ft. lb.) → Tightening torque: 4.5 Nm (3.5 ft. lb.)