Removing Wiring Harness For Number Plate Light

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Wiring Harness For Number Plate Light

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Remove wiring harness for number plate light from the four line holders.

Fig 2: Removing Wiring Harness For Number Plate Light From Four Line Holders
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Release the connectors for the two number plate lights -arrow a- and pull them off.

Fig 3: Pulling Off Number Plate Light Connectors
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Release the connectors for the four ParkAssist sensors -arrow a- and pull them off.

Fig 4: Pulling Off Connectors For Park Assist Sensors
Courtesy of PORSCHE CARS NORTH AMERICA, INC.