LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (97 - Cables -- CARRERA (997)) >> WM 978319 Removing And Installing Relay Carrier 1 (All Models) >> Installing Relay Carrier 1 >> Installing Relay Carrier 1 In The Retaining Frame

Installing Relay Carrier 1 In The Retaining Frame

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slide in the relay carrier from below at approx. 45° slant into the support.
    Fig 1: Pushing Relay Carrier Into Retaining Frame
    G09831572Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Secure the support lugs from the relay carrier into the support and engage the relay carrier in the support.
scientia non olet · About LEMON Manuals