Subsequent Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
Only required for wire harness for suction fan and seat heating.
- Install backrest cover on the left side at the inside and outside. → Installing Cover For Backrest
- section on "Installing"
Information
Only required for wire harness for suction fan and seat heating.
- Secure front backrest covering underneath at the left side. → Installing Cover For Front Backrest
- section on "Installing"
Information
Only required for wire harness for suction fan and seat heating.
- Install covering for middle backrest. → Installing Cover For Front Middle Backrest - section on "Installing"
- Install suction fan for seat surface. → Installing Suction Fan For Seat Surface - section on "Installing"
- Install control unit for memory seat adjustment. → Installing Control Unit For Memory Seat Adjustment - section on "Installing"
- Install the front seat. → Installing Front Seat - section on "Installing"
- Connect the battery. → Disconnecting And Connecting The Battery