Removing Relay Carrier 1 From The Retaining Frame

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Relay Carrier Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

A - Relay carrier 1

-A- Pull apart both retaining lugs on relay carrier support and press the relay carrier upward.

Fig 2: Removing Relay Carrier
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
-B- Press relay carrier upward approx. 45° on the right side.
-C- Pull out the support lugs of the relay carrier from the support and -D- pull out the relay carrier downward.

Fig 3: Pulling Out Relay Carrier Of Retaining Frame
Courtesy of PORSCHE CARS NORTH AMERICA, INC.