LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (97 - Cables -- CARRERA (997)) >> WM 975619 Removing And Installing Wire Harness For Backrest (Front Seat) (All Models) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install suction fan for seat surface. → Installing Suction Fan For Seat Surface - section on "Installing"
  2. Install cover for left backrest. → Installing Cover For Backrest - section on "Installing"
  3. Install cushion carrier for front backrest. → Installing Cushion Carrier For Front Backrest - section on "Installing"
  4. Install the front seat. → Installing Front Seat - section on "Installing"


  1. Install air cushion for backrest. → Installing Air Cushion For Backrest - section on "Installing"
  2. Install cover for left backrest. → Installing Cover For Backrest - section on "Installing"
  3. Install cushion carrier for front backrest. → Installing Cushion Carrier For Front Backrest - section on "Installing"
scientia non olet · About LEMON Manuals