Section 471 (Automatic Transmission - Overhaul - ALLISON)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, 2003 Chevrolet Cab & Chassis Silverado, and 2002 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
- Application
- Identification
- Description & Operation
- Lubrication
- Trouble Shooting
- Component Testing
- Transmission Disassembly
- Transmission
- External Components
- Torque Converter & Converter Housing/Front Support Module
- Rotating Clutch Module
- Oil Pan & Suction Filter
- Wiring Harness Assembly
- Control Valve (Valve Body) Assembly
- Rear Ball Bearing
- Rear Housing Components
- Park Pawl
- P2 Planetary Module & Main Shaft
- C5 Clutch
- P1 Planetary Module
- C4 Clutch
- C4 Clutch Piston Assembly
- C3 Clutch
- C3 Clutch Piston Assembly
- Component Disassembly & Reassembly
- Notes
- Converter Housing/Front Support Module
- Converter Housing
- Main Pump
- Front Support Assembly
- Rotating Clutch Module
- Disassembly
- Turbine Shaft Inspection & Bushing Replacement
- Rotating Clutch Housing Inspection
- Rotating Clutch Housing Bushing Replacement
- Rotating Clutch Housing Tone Wheel Replacement
- C1 & C2 Clutch Friction Plate Inspection
- C1 & C2 Clutch Reaction Plate Inspection
- C1 Clutch Backplate Inspection
- C1 Clutch Housing Piston Inspection
- Reassembly
- Main Housing Assembly
- Ring Gear & Clutch Component Inspections
- Main Shaft Inspection
- P1 Planetary Module
- P2 Planetary Module
- P3 Planetary Carrier Assembly
- Rear Cover Assembly
- Output Yoke Inspection
- Control Valve Module
- Transmission Reassembly
- Notes
- C3 Clutch Installation
- P1 Planetary Module & C4 Clutch Installation
- C5 Clutch Reaction Plate Selection
- P2 Planetary Module & Main Shaft Installation
- C5 Clutch Installation
- Park Pawl Installation
- Output Shaft & P3 Planetary Carrier Assembly Installation
- Rear Cover Assembly Installation
- Control Valve Assembly Installation
- Wiring Harness Assembly Installation
- Oil Pan & Suction Filter Installation
- Rotating Clutch Assembly Installation
- Converter Housing/Front Support Module Installation
- Rear Cover Selective Spacer Installation
- Transmission End Play
- Torque Converter Installation
- Neutral/Safety/Backup Switch Installation
- Rear Seal Installation (2WD Only)
- Output Nut Installation
- Vent Hose Installation
- Input, Turbine & Output Speed Sensor Installation
- Removing Transmission From Repair Stand
- Torque Specifications
- Transmission Specifications