C1 & C2 Clutch Reaction Plate Inspection
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, 2003 Chevrolet Cab & Chassis Silverado, and 2002 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
- Measure thickness of each clutch reaction plate (dimension "A") in at least 3 locations. See Fig 1. Compare measurement to specifications. See ROTATING CLUTCH MODULE SPECIFICATIONS table under TRANSMISSION SPECIFICATIONS. If reaction plate is less than minimum thickness at any point, replace reaction plate.
- Place reaction plate on a level surface and measure cone of each plate (dimension "B") in at least 3 locations. See Fig 2. Compare measurement to specifications. See ROTATING CLUTCH MODULE SPECIFICATIONS table under TRANSMISSION SPECIFICATIONS. If cone is more than specified at any location, replace reaction plate.