LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 471 (Automatic Transmission - Overhaul - ALLISON) >> Component Disassembly & Reassembly >> P1 Planetary Module >> P2 Planetary Ring Gear Inspection

P2 Planetary Ring Gear Inspection

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, 2003 Chevrolet Cab & Chassis Silverado, and 2002 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Clutch plate movement can cause notching on the external splines of the P2 ring gear.

Measure any notching on external splines of P2 planetary ring gear (dimension "A"). See Figure and Fig 1 . Compare measurements to specifications. See PLANETARY GEAR MODULE SPECIFICATIONS  table under TRANSMISSION SPECIFICATIONS. Replace the P2 planetary ring gear if it does not meet specifications.

Fig 1: Exploded View Of P1, P2 Planetary Modules & Main Shaft Components
G00117169Courtesy of GENERAL MOTORS CORP.