Torque Converter Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, 2003 Chevrolet Cab & Chassis Silverado, and 2002 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
DO NOT tilt or rotate transmission housing assembly until torque converter is fully retained in place or damage may occur.
Position transmission so front of converter housing is upward. Attach a sling and hoist to torque converter. Lower torque converter over turbine shaft and ground sleeve and into main pump assembly. Ensure torque converter is properly seated in main pump.