4WD Transmissions
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, 2003 Chevrolet Cab & Chassis Silverado, and 2002 GMC Sierra. However, it is still accessible from the selected car via links, so may be relevant.
- Position main housing so rear end is facing upward. Measure distance (dimension "A") from rear face of rear cover to rear face of bearing spacer. See Fig 2.
- Measure distance from rear face of rear cover module to rear face of retaining ring (dimension "B"). See Fig 2. Calculate selective spacer size (dimension "C") by subtracting dimension "B" from dimension "A". Compare result to proper spacer size. See REAR COVER SELECTIVE SPACER IDENTIFICATION table. Install proper selective spacer onto output shaft.
REAR COVER SELECTIVE SPACER IDENTIFICATION
| Dimension "C" In. (mm) | Part No. (No. Of Holes) | Selective Spacer Thickness In. (mm) |
|---|---|---|
| .0397-.0466 (1.008-1.184) | 29536850 (0) | .0096-.0116 (.244-.295) |
| .0467-.0557 (1.186-1.415) | 29536851 (1) | .0187-.0207 (.475-.526) |
| .0557-.0647 (1.416-1.643) | 29536852 (2) | .0278-.0297 (.706-.754) |
| .0648-.0738 (1.646-1.875) | 29536853 (3) | .0368-.0388 (.935-.986) |
| .0738-.0828 (1.875-2.103) | 29536854 (4) | .0459-.0478 (1.166-1.214) |
| .0829-.0919 (2.106-2.334) | 29536855 (5) | .0549-.0569 (1.394-1.445) |
| .0919-.0985 2.335-2.501) | 29536856 (6) | .0640-.0659 (1.626-1.674) |