39 - Final Drive Differential, Differential Lock (4.8L Turbo) -- 92A - Cayenne (92A)

• WM, 390119 Removing And Installing Rear Final Drive
  • Technical Values
  • Preliminary Work
  • Removing Rear Final Drive
  • Installing Rear Final Drive
  • Subsequent Work
• WM, 390219 Removing And Installing Front CARDAN Shaft
  • Technical Values
  • Preliminary Work
  • Removing Front CARDAN Shaft
    • Assembly Overview - Cardan Shafts
    • Installing Front Cardan Shaft
  • Subsequent Work
• WM, 392255 Replacing Sealing Ring For HALFSHAFT Flange
  • Tools
  • Preliminary Work
  • Removing Sealing Ring For HALFSHAFT Flange
  • Installing Sealing Ring For HALFSHAFT Flange
    • Installing Sealing Ring For Halfshaft Flange (Right Side)
    • Installing Sealing Ring For Halfshaft Flange (Left Side)
  • Subsequent Work
• WM, 393519 Removing And Installing Rear CARDAN Shaft
  • Technical Values
  • Preliminary Work
  • Removing Rear CARDAN Shaft
    • Assembly Overview - Cardan Shafts
  • Installing Rear CARDAN Shaft
  • Subsequent Work
• WM, 395555 Replacing Sealing Ring For CARDAN Flange
  • Tools
  • Preliminary Work
  • Removing Sealing Ring For CARDAN Flange
  • Installing Sealing Ring For CARDAN Flange
  • Subsequent Work
• WM, 395955 Replacing Sealing Ring For All-Wheel Drive HALFSHAFT Flange
  • Tools
  • Preliminary Work
  • Removing Sealing Ring For All-Wheel Drive Flange Shaft
    • Removing Sealing Ring For Left Flanged Shaft
    • Removing Sealing Ring For Right Flanged Shaft
  • Installing Sealing Ring For All-Wheel Drive Flange Shaft
    • Installing Sealing Ring For Left Flanged Shaft
    • Installing Sealing Ring For Right Flanged Shaft
  • Subsequent Work
• WM, 396155 Removing And Installing Rubber Mounting For All-Wheel Final Drive
  • Tools
  • Preliminary Work
  • Removing Rubber Mounting For All-Wheel Final Drive
    • Removing Rubber Mounting For All-Wheel Final Drive, Drive Side
    • Removing Rubber Mounting For All-Wheel Final Drive, Right Output Side
    • Removing Rubber Mounting For All-Wheel Final Drive, Left Output Side
  • Installing Rubber Mounting For All-Wheel Final Drive
    • Installing Rubber Mounting For All-Wheel Final Drive, Drive Side
    • Installing Rubber Mounting For All-Wheel Final Drive, Right Output Side
    • Installing Rubber Mounting For Final Drive, Left Output Side
  • Subsequent Work
• WM, 396155 Removing And Installing Rubber Mounting For Rear Final Drive
  • Tools
  • Preliminary Work
  • Removing Rubber Mounting For Rear Final Drive
    • Removing Rubber Mounting For Rear Final Drive, Drive Side
    • Removing Rubber Mounting For Rear Final Drive, Output Side
  • Installing Rubber Mounting For Rear Final Drive
    • Installing Rubber Mounting For Rear Final Drive, Output Side
    • Installing Rubber Mounting For Rear Final Drive, Drive Side
  • Subsequent Work
• Ti, 3965 Transfer Gear Replacement: Checking Type, Conversion May Be Required (96/16)
  • Parts
• Ti, 3965 Complaint - Repair Instructions In The Event Of Transfer Case Oil Leaks: Follow Recommended Course Of Action (34/19)
  • Parts
  • Overview - Location Of Leaks On Transfer Gear
  • 1 - Rear Transfer Gear Housing - Damage, Possible Causes And Repair Measures
  • 2 - Front Transfer Gear Housing (Bottom) - Damage, Possible Causes And Repair Measures
  • 3 - Lower Transfer Gear Housing - Damage, Possible Causes And Repair Measures
• Ti, 3965 ATI Shudder/Vibration On Acceleration (1101)
  • Shudder/Vibration On Acceleration
• WM, 396519 Removing And Installing Transfer Box
  • Tools
  • Technical Values
  • Preliminary Work For Transfer Box
    • Preliminary Work
  • Removing Transfer Box
    • Removing Transfer Gear
    • Installing Transfer Box
    • Replacing Transfer Box With Servo Motor (With Integrated Control Unit)
  • Subsequent Work For Transfer Box
    • Subsequent Work For Transfer Gear
• WM, 397019 Removing And Installing Transfer Gear Vent Line
  • Tools
  • Technical Values
  • Preliminary Work
    • Preliminary Work For Removing And Installing Transfer Gear Vent Line
  • Removing Transfer Gear Vent Line
  • Installing Transfer Gear Vent Line
  • Subsequent Work
    • Subsequent Work For Removing And Installing Transfer Gear Vent Line
• WM, 397519 Removing And Installing Control Unit For Rear-Differential Lock
  • Technical Values
  • Preliminary Work
  • Removing Control Unit For Rear-Differential Lock
  • Installing Control Unit For Rear-Differential Lock
  • Subsequent Work
• WM, 397555 Replacing Control Unit For Rear-Differential Lock
  • Replacing Control Unit For Rear-Differential Lock
• WM, 397719 Removing And Installing Servo Motor For Rear-Differential Lock
  • Technical Values
  • Removing Servo Motor For Rear-Differential Lock
    • Removing Transverse Lock Servo Motor
  • Installing Servo Motor For Rear-Differential Lock
  • Subsequent Work
• Ti, 3978 Eliminating Symptoms In Body Interior: Reworking Wire Harness On Transfer Case Servo Motor (Warning Message "Fault All-Wheel Drive System" In The Instrument Cluster)/SY1916)
  • Parts
  • General Information
    • Symptom
    • Causes And Remedial Action
      • Notes
      • Cause
      • Remedial Action
    • Repairing Electric Plug Connection On Transfer Case Servo Motor
    • Replacing Electric Plug Connection And Transfer Case Servo Motor
    • Invoicing
• WM, 397819 Removing And Installing Servo Motor (With Integrated Control Unit) On Transfer Box
  • Technical Values
  • Preliminary Work
    • Preliminary Work For Removing And Installing Servo Motor On Transfer Gear
  • Removing Servo Motor On Transfer Box
    • Removing Servo Motor On Transfer Gear
  • Installing Servo Motor On Transfer Box
  • Subsequent Work
    • Subsequent Work For Removing And Installing Servo Motor On Transfer Gear
• WM, 397855 Replacing Servo Motor (With Integrated Control Unit) On Transfer Gear
  • Preliminary Work
  • Reading And Writing Values
• WM, 398255 Replacing Sealing Ring For CARDAN Flange
  • Tools
  • Preliminary Work
  • Removing Sealing Ring For CARDAN Flange
  • Installing Sealing Ring For CARDAN Flange
  • Subsequent Work
• WM, 398819 Removing And Installing All-Wheel Final Drive
  • Tools
  • Technical Values
  • Preliminary Work For All-Wheel Final Drive
  • Information
    • Tools And Materials
      • Notes
      • Old version without retrofit set
      • New version with retrofit set
  • Removing All-Wheel Final Drive
  • Installing All-Wheel Final Drive
  • Subsequent Work For All-Wheel Final Drive
• WM, 399035 Checking And Topping Up Oil For All-Wheel Final Drive
  • Tools
  • Technical Values
  • Preliminary Work For Oil For All-Wheel Final Drive
  • Checking Oil For All-Wheel Final Drive
  • Topping Up Oil For All-Wheel Final Drive
    • Oil Adjustment Specifications For Front-Axle Final Drive And Rear Axle Differential
  • Subsequent Work For Oil For All-Wheel Final Drive
• WM, 399035 Checking And Topping Up Oil For Rear Final Drive
  • Tools
  • Technical Values
  • Checking Oil For Rear Final Drive
  • Topping Up Oil For Final Drive
    • Oil Adjustment Specifications For Front-Axle Final Drive And Rear Axle Differential
• WM, 399035 Checking And Topping Up Oil For Transfer Box
  • Tools
  • Technical Values
  • Checking Oil For Transfer Box
  • Topping Up Oil For Transfer Box
    • Topping Up Oil For Transfer Gear
• WM, 399055 Changing Oil For All-Wheel Final Drive
  • Tools
  • Technical Values
  • Preliminary Work For Oil For All-Wheel Final Drive
  • Changing Oil For All-Wheel Final Drive
    • Oil Adjustment Specifications For Front-Axle Final Drive And Rear Axle Differential
  • Subsequent Work For Oil For All-Wheel Final Drive
• WM, 399055 Changing Oil For Transfer Box
  • Tools
  • Technical Values
  • Preliminary Work
  • Changing Oil For Transfer Box
  • Subsequent Work
• WM, 399055 Changing Oil For Rear Final Drive
  • Tools
  • Technical Values
  • Changing Oil For Rear Final Drive
    • Oil Adjustment Specifications For Front-Axle Final Drive And Rear Axle Differential
    • Changing Oil For Final Drive
• WM, 399255 Replacing Sealing Ring For Transfer Gear (Inner Drive)
  • Tools
  • Preliminary Work
  • Removing Sealing Ring For Transfer Gear
  • Installing Sealing Ring For Transfer Gear
  • Subsequent Work
• WM, 399255 Replacing Sealing Ring For Transfer Gear (Rear Output Shaft)
  • Tools
  • Preliminary Work
  • Removing Sealing Ring For Transfer Gear
  • Installing Sealing Ring For Transfer Gear
  • Subsequent Work
• WM, 399255 Replacing Sealing Ring For Transfer Gear (Front Output Shaft)
  • Tools
  • Preliminary Work
  • Removing Sealing Ring For Transfer Gear
  • Installing Sealing Ring For Transfer Gear
  • Subsequent Work
• SY, 399525 Noise Symptom/Jerking Or Spare Parts Requirements - Clicking Noise/Rough-Running Engine/Jerking Under Load With Respect To Transfer Gear: Programming All-Wheel Drive Control Unit/Checking Transfer Gear (SY 84/17)
  • Tools