Preliminary Work
Information
- For more information, see Porsche Spare Parts Information.
Information
Transfer gear with gas nitrocarburised (GNC) "hardened" steel plates.
- Check compatibility of hardware (transfer gear) and software.
- If a transfer gear with GNC plates is installed for the first time, the PR number LU2 must be written under Maintenance of vehicle data in the PIWIS Tester.
- Read off the item number on the transfer gear and use the table to check which control unit is required.
- 1.1 If the item number on the transfer gear matches an item number listed in the table, the transfer gear control unit (Item No. 958.618.755.12) without GNC must be installed.
- 1.2 If the item number on the transfer gear is not listed in the table, the transfer gear control unit with GNC (PR number: LU2) must be installed.
| Item number for transfer gear control unit | Item numbers for transfer gear without GNC (LU2) | ||
|---|---|---|---|
| VW transmission part number (installed ex-works) | Porsche transmission part number (punched out in After Sales) | ||
| 958.618.755.12 | Use old type only for transfer gear without GNC. | 0C2 341 013 M | 958 341 012 00 |
| 0C2 341 013 S | 958 341 012 01 | ||
| 0C2 341 041 B | 958 341 012 02 | ||
| 0C2 341 041 J | 958 341 012 04 | ||
| 0C2 341 013 N | 958 341 012 10 | ||
| 0C2 341 041 | 958 341 012 11 | ||
| 0C2 341 041 D | 958 341 012 12 | ||
| 0C2 341 041 M | 958 341 012 14 | ||
| 0C2 341 013 P | 958 341 012 20 | ||
| 0C2 341 013 R | 958 341 013 00 | ||
| 0C2 341 041 A | 958 341 013 01 | ||
| 0C2 341 041 K | 958 341 013 03 | ||
| 0C2 341 013 T | 958 341 013 05 | ||
| 0C2 341 041 C | 958 341 013 06 | ||
| 0C2 341 041 L | 958 341 013 08 | ||