LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Cayenne Turbo >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> 39 - Final Drive Differential, Differential Lock (4.8L Turbo) -- 92A - Cayenne (92A) >> WM, 397019 Removing And Installing Transfer Gear Vent Line >> Preliminary Work >> Preliminary Work For Removing And Installing Transfer Gear Vent Line

Preliminary Work For Removing And Installing Transfer Gear Vent Line

  1. Remove right engine compartment cover.
  2. Remove right engine design cover.
  3. Remove secondary-air pump.

    > 266519 Removing and installing secondary-air pump - section on  "REMOVING "

  4. Remove torque support.

    > 103719 Removing and installing torque support - section on  "REMOVING "

  5. Remove camshaft housing ventilation.
  6. Remove engine guard.

    > 108019 Removing and installing engine guard - section on "REMOVING "

  7. Remove exhaust system holder.
  8. Remove air vane.
  9. Remove front cardan shaft.

    > 390219 Removing and installing front cardan shaft - section on "REMOVING "

  10. Remove rear cardan shaft.

    > 393519 Removing and installing rear cardan shaft - section on  "REMOVING "

  11. Unscrew M10 fastening screws on outer transmission cross member and lower cross member by 40 mm. > VAS 6931 - Transmission and Engine Jack
scientia non olet · About LEMON Manuals