Section 32 (On Board Diagnostic (OBD) - 2001 And Up)
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- Instrument cluster, On Board Diagnostic (OBD)
- General information
- Instrument cluster On Board Diagnostic (OBD), initiating
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Output Diagnostic Test Mode (DTM) (function 03)
- Erase DTC Memory (function 05)
- End Output (function 06)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Notes
- Display group overview
- Measuring value block 001
- Measuring Value Block 002
- Measuring Value Block 003
- Measuring value block 010
- Measuring value block 011
- Measuring value block 012
- Measuring value block 013
- Measuring value block 014
- Measuring value block 015
- Measuring value block 050
- Measuring value block 125
- Measuring value block 126
- Measuring value block 130
- Measuring value block 140
- Adaptation (function 10)
- Notes
- Adaptation Table
- Initiating "Adaptation" function 10
- Adaptation channel 02-Resetting SRI after service
- Adaptation channel 03-Adaptation of fuel consumption display
- Adaptation channel 04-Language versions of driver information system
- Adaptation channel 09 - Odometer display
- Adaptation channel 18-Adaptation of auxiliary heater
- Adaptation channel 30-Adaptation of fuel gauge sender resistance range
- Adaptation channel 35-Adaptation of the engine speed threshold
- Adaptation channel 40-Distance driven since service
- Adaptation channel 41 - time since service
- Adaptation channel 42 - minimum mileage performance
- Adaptation channel 43 - maximum mileage performance
- Adaptation channel 44 - maximum time interval
- Adaptation channel 45 - Adaptation to oil quality
- Adaptation channel 60-Adaptation for powertrain data-BUS
- Adaptation channel 61-Adaptation for comfort system CAN-bus
- Adaptation channel 62-Adaptation for information data-BUS
- Input values for replacing instrument cluster
- Re-setting service interval display after service without VAS 5051
- Data exchange between control modules, checking
- Anti-theft immobilizer, On Board Diagnostic (OBD)
- General information
- Safety precautions
- Immobilizer On Board Diagnostic (OBD), initiating
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Erase DTC Memory (function 05)
- End Output (function 06)
- Read Measuring Value Block (function 08)
- Adaptation (function 10)
- Adaptation of vehicle keys
- Lost key procedure
- Adaptation after replacing instrument cluster
- Adaptation after replacing Engine Control Module (ECM)
- Adaptation after replacing instrument cluster and the Engine Control Module (ECM)
- Login Procedure (function 11)
- Cruise control system, On Board Diagnostic (OBD)
- Acoustic Parking System (APS), On Board Diagnostic (OBD)
- General information
- Safety precautions
- Parking assistance On Board Diagnostic (OBD), initiating
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Output Diagnostic Test Mode (DTM) (function 03)
- Erase DTC Memory (function 05)
- End Output (function 06)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- 4-channel parking assistance, display group overview
- 8-channel parking assistance, display group overview
- Adaptation (function 10)
- Automatic headlight beam adjustment On Board Diagnostic (OBD)
- General information
- Safety precautions
- Automatic vertical headlight aim control On Board Diagnostic (OBD), initiating
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Output Diagnostic Test Mode (DTM) (function 03)
- Basic Setting (function 04)
- Erase DTC Memory (function 05)
- End Output (function 06)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- VAS 5051 tester, connecting