Adaptation channel 45 - Adaptation to oil quality

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The used oil must be adapted anew after every service.
For USA vehicles the current adaptation value is "1".
The currently valid specifications can be found in the "Maintenance" book.

See MAINTENANCE .

Display on VAS 5051:

Fig 1: Display On VAS 5051 - Adaptation Channel 45, Adaptation To Oil Quality (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Select function "45" in button field -2- for "Adaptation channel 45" and press Q button to confirm input.

Display on VAS 5051:

Fig 2: Display On VAS 5051 - Adaptation Channel 45, Adaptation To Oil Quality (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Channel 45
1. read and test
Oil-quality
Keypad - only direct input via the keypad is possible
The sliding bar is positioned on the current adaptation value

Change adaptation value via direct input. See B - Change adaptation value via direct input: .
Enter 5-digit adaptation value. Insert zeros in front.

Example:

Specification: 1

Keypad input: 00001

Display on VAS 5051 after performed adaptation:

Fig 3: Display On VAS 5051 - Adaptation Channel 45, Adaptation To Oil Quality (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

1 - Channel 45
1. Value 1 stored

End function "10 - Adaptation" by pressing <= button.