LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1999 >> A6 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (On Board Diagnostic (OBD) - 2001 And Up) >> Instrument cluster, On Board Diagnostic (OBD) >> Input values for replacing instrument cluster >> Notes

Input values for replacing instrument cluster: Notes

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

The following must always be observed when replacing the instrument cluster:

NOTE:
  • Instrument cluster must always be coded.
  • Note the values indicated in measuring value blocks 10 to 15 before replacing!
  • Note odometer reading or input value of odometer display (in miles) in measuring value block 10 (display field 4) before replacing and enter as directed! See Measuring value block 010  .
  • In countries where speedometers are calibrated in miles, adaptation is performed in miles.
  • In countries where speedometers are calibrated in kilometers, adaptation is performed in kilometers.
scientia non olet · About LEMON Manuals