Check DTC Memory (function 02): Notes

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.

Initiate output Diagnostic Test Mode of instrument cluster. See INSTRUMENT CLUSTER ON BOARD DIAGNOSTIC (OBD), INITIATING .

Display on VAS 5051:

Fig 1: VAS 5051 Tester Display - Checking DTC Memory, Instrument Cluster (1 Of 2)

Courtesy of AUDI OF AMERICA, INC.

In selection -1-, click on the diagnostic function "02 - Check DTC Memory".

Display on VAS 5051:

Fig 2: VAS 5051 Tester Display - Checking DTC Memory, Instrument Cluster (2 Of 2)

Courtesy of AUDI OF AMERICA, INC.

DTC memory content:
- 0 malfunctions recognized
- X malfunctions recognized
Diagnostic Trouble Code (DTC)
- DTC
- malfunction location
- malfunction type