Code Control Module (function 07): Procedure

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Initiate On Board Diagnostic (OBD) of automatic vertical headlight aim control. See AUTOMATIC VERTICAL HEADLIGHT AIM CONTROL ON BOARD DIAGNOSTIC (OBD), INITIATING .

Display on VAS 5051:

Fig 1: Display On VAS 5051 - Code Control Module (Automatic Headlight Aim Control) (1 Of 4)

Courtesy of AUDI OF AMERICA, INC.

Select diagnostic function "07 - Code Control Module" in selection -1-.

Display on VAS 5051:

Fig 2: Display On VAS 5051 - Code Control Module (Automatic Headlight Aim Control) (2 Of 4)

Courtesy of AUDI OF AMERICA, INC.

Enter code word Max. input value = 32767

Enter 5-digit coding in button field -2-. Insert zeros in front.

CODE DESCRIPTION - AUTOMATIC HEADLIGHT AIM CONTROL

Code	Vehicle model/drive layout
00020	A6/S6 sedan/Avant
00030	allroad quattro

Example:

Desired input value: 20

Keypad input: 00020

Press -Q- button to confirm input.

Display on VAS 5051:

Fig 3: Display On VAS 5051 - Code Control Module (Automatic Headlight Aim Control) (3 Of 4)

Courtesy of AUDI OF AMERICA, INC.

Coding will be performed

Wait until the next indication appears on display.

Display on VAS 5051:

Fig 4: Display On VAS 5051 - Code Control Module (Automatic Headlight Aim Control) (4 Of 4)

Courtesy of AUDI OF AMERICA, INC.

Coding in vehicle system performed
Control module identification with new coding
1. (previous coding in parentheses)

End function "07 - Erase DTC Memory" by pressing <-- button.
Initiate Output Diagnostic Test Mode (DTM). See BASIC SETTING (FUNCTION 04) .